Basics · 4 min read

How to choose a portable power station: the eight specs that matter

A step-by-step way to read a spec sheet: capacity, continuous output, surge, recharging, weight, chemistry, expansion and safety listings.

Published Nov 4, 2026 · Last reviewed Nov 4, 2026

A person checking the output ports of a portable power station against its spec sheet
Illustration (AI-generated). Not a photo of a tested product.

Start with the job, not the product

A portable power station is a battery, an inverter and a set of charging inputs in one box. Two units with the same headline capacity can suit very different jobs, so write down what you want it to do before you look at models: keep a CPAP running for a weekend, keep a fridge cold through an outage, or run a few tools at a job site. Each job puts weight on different specifications.

Then work through the eight specs below in order. The first three decide whether a unit can do the job at all. The rest decide how pleasant it is to live with.

1. Battery capacity (Wh): how long it lasts

Capacity in watt-hours (Wh) is the stored energy. It sets runtime. Add up what your devices use over the time you need to cover, allow for conversion losses and a safety margin, and you have a minimum. Our How many watt-hours do I need? guide walks through the arithmetic, and the calculator does it for you.

In our database, capacity runs from 288 Wh (BLUETTI Elite 30 V2 and Anker SOLIX C300) to 4,096 Wh (EcoFlow DELTA Pro 3).

2. Continuous AC output (W): what it can run at once

Continuous output is the most power the inverter can deliver steadily. Add the running watts of everything that may be on at the same time; the station's continuous AC rating must be higher. A big battery with a small inverter cannot run a 1,000 W microwave no matter how full it is.

3. Surge output (W): motors and compressors

Fridges, pumps, fans and power tools draw a burst of extra power when the motor starts. A compressor maker's technical note puts direct-on-line starting current at 4 to 7 times operating current for its commercial compressors, and a university extension rule of thumb says motors need about four times their running power to start. Household appliances vary, so check the appliance label or manual for a starting or locked-rotor figure and compare it with the station's surge rating.

Not every manufacturer publishes a surge rating. In our database, all four BLUETTI models are listed as 'Not published' for surge, and our calculator treats that as unconfirmed rather than guessing.

4. Recharging: AC, solar and car inputs

Look at the maximum AC charging rate and the maximum solar input in watts, plus the solar input voltage window. Higher solar input only helps if you own panels that can deliver it; see Solar charging explained.

5. Weight and size

Weight in our database ranges from 7.5 lb (Jackery Explorer 300) to 113.54 lb (EcoFlow DELTA Pro 3). Anything above roughly 40 to 50 lb is a two-hand or wheeled carry; decide honestly how far you will move it.

6. Battery chemistry

Every unit in our current database lists LiFePO4 (lithium iron phosphate). In Sandia National Laboratories' published cell tests, LFP cells lasted far more cycles than NMC cells under the conditions tested. See LiFePO4 vs other chemistries for what that does and does not mean.

7. Expandability

Some models accept extra battery packs. In our database, the Jackery Explorer 1000 Plus lists expansion to 5,056 Wh, the EcoFlow DELTA 3 Plus to 5,000 Wh, the Anker SOLIX C2000 Gen 2 to 4,000 Wh and the EcoFlow DELTA Pro 3 to 12,000 Wh for a single unit. Expansion packs are sold separately and add weight and cost.

8. Safety listing, warranty and price per Wh

UL 2743 is the UL standard for portable power packs: battery units that act as a portable power source when grid power is unavailable. Check the product's documentation or label for a listing from a recognized test lab; we do not assume a listing unless the manufacturer states it.

Warranty, where published, is 5 years for most units in our database. Price per watt-hour at list price ranged from about $0.40 to $1.49 when we checked on Nov 4, 2026, with smaller units generally costing more per Wh.

A quick decision order

  • Calculate the watt-hours you need; rule out anything smaller.
  • Add the running watts of loads that run together; rule out anything with lower continuous output.
  • If you will run motors, confirm the surge rating covers the starting draw.
  • Check recharging: AC rate for outages, solar input and voltage window for off-grid use.
  • Only then compare weight, expansion, warranty and price per Wh.

What this guide is not

We have not physically tested these products. Figures come from manufacturer specification pages and manuals, linked on each product in our database.

Ready to put numbers on it?

Open the calculator

Sources

  1. Power Station Advisor product database (manufacturer specifications, checked Nov 4, 2026). Power Station Advisor.
  2. Portable Power Pack Testing (UL 2743). UL Solutions.
  3. Q&A: Portable Power Packs. UL Solutions, The Code Authority.
  4. Degradation of Commercial Lithium-Ion Cells as a Function of Chemistry and Cycling Conditions (J. Electrochem. Soc., 2020). Sandia National Laboratories, via DOE OSTI.
  5. Airline Passengers and Batteries (PackSafe). Federal Aviation Administration.

Related guides

We have not physically tested any product mentioned. Specifications come from manufacturer pages and manuals; calculations are estimates. See our methodology.

← All guides