Basics · 3 min read

How to calculate appliance power consumption

Four ways to find out how much energy a device really uses: the label, the EnergyGuide, a plug-in meter and the manufacturer's spec sheet.

Published Nov 4, 2026 · Last reviewed Nov 4, 2026

A person reading the power rating label on a kitchen appliance
Illustration (AI-generated). Not a photo of a tested product.

Why it matters

The calculator is only as good as the numbers you feed it. The starting wattages in our calculator are typical values, not your devices. Ten minutes spent finding real figures can change the battery size you need by hundreds of watt-hours.

Method 1: read the label or adapter

Most devices state watts, or volts and amps, on a nameplate or power adapter. If only volts and amps are shown, multiply them for a maximum: a 12 V, 1 A router adapter is rated about 12 W. NETGEAR's support guidance says a router's power consumption does not exceed its adapter rating, so treat label figures as a ceiling, not typical draw. Apple's MacBook Air ships with a 40 W adapter; the laptop draws less once charged.

Method 2: use the EnergyGuide label

For refrigerators, freezers and other covered appliances, the EnergyGuide label gives estimated yearly energy use in kWh. Convert it: kWh per year × 1,000 ÷ 365 = Wh per day. A 450 kWh/year fridge uses about 1,233 Wh/day. The FTC notes the label's figures are estimates based on typical use.

Method 3: measure with a plug-in meter

The DOE recommends electricity usage monitors as the most direct way to learn what a device uses. They work on 120-volt plug-in devices, not 240-volt appliances such as dryers. Plug the device in through the meter and leave it for a full day of normal use. For cycling appliances, read the kWh total rather than the instantaneous watts.

Method 4: the manufacturer's data

Some makers publish measured consumption. ResMed, for example, lists AirSense 10 consumption of about 7 watt-hours per hour for the device alone, 22 with the humidifier and 34 with humidifier and heated tube, at stated settings. The DOE says a 1,100-lumen LED bulb can use as little as 9 watts.

Turning watts into daily energy

The DOE's formula: wattage × hours used per day ÷ 1,000 = kWh per day. We work in Wh, so skip the division.

Example: an 80 W TV for 4 hours is 320 Wh. A router at its 12 W ceiling for 24 hours is at most 288 Wh. For appliances that cycle, the DOE suggests estimating running time as about one third of the time they are plugged in.

Common pitfalls

  • Using the adapter rating as typical draw: it is a maximum.
  • Ignoring standby: some devices draw power when 'off'.
  • Ignoring startup: motors and compressors draw a surge when they start, which matters for the station's surge rating, not its capacity.
  • Forgetting heating elements: anything that heats (kettles, hair dryers, CPAP humidifiers) draws far more than electronics.

Put the numbers to work

Enter what you found in the calculator. It separates energy (Wh), continuous output (W) and surge so you can see which spec limits your choice.

Ready to put numbers on it?

Open the calculator

Sources

  1. Estimating Appliance and Home Electronic Energy Use. U.S. Department of Energy, Energy Saver.
  2. Shopping for Home Appliances? Use the EnergyGuide Label. Federal Trade Commission.
  3. 16 CFR § 305.14: Label content for refrigerators, refrigerator-freezers, and freezers. Federal Trade Commission rule (via Cornell LII).
  4. Maximum power consumption for NETGEAR WiFi Routers. NETGEAR.
  5. MacBook Air Technical Specifications. Apple.
  6. Consumer Guide to Energy-Efficient Lighting. U.S. Department of Energy.
  7. Power consumption of Air10 devices. ResMed.

Related guides

We have not physically tested any product mentioned. Specifications come from manufacturer pages and manuals; calculations are estimates. See our methodology.

← All guides