Basics · 2 min read

How long will a 1,000 Wh power station last?

Runtime for common devices on a 1,000 Wh battery, the formula behind it, and why the answer is always shorter than 1,000 ÷ watts.

Published Nov 4, 2026 · Last reviewed Nov 4, 2026

Portable power station powering a laptop and a desk lamp in the evening
Illustration (AI-generated). Not a photo of a tested product.

The formula

Runtime (hours) = battery Wh × conversion efficiency ÷ device watts.

With our planning assumption of 85% efficiency, a 1,000 Wh battery delivers about 850 Wh to AC devices. Manufacturers in our database do not publish inverter efficiency, so 85% is an assumption, not a measurement; your result could be higher or lower.

Runtime for common loads (about 850 Wh usable)

LoadDraw usedEstimated runtime
Pedestal fan50 Wabout 17 hours
Four LED bulbs4 × 10 Wabout 21 hours
Laptop adapter at full rating40 W (MacBook Air adapter rating)about 21 hours; longer in practice
CPAP, device onlyabout 7 Wh per hour (AirSense 10)about 15 nights of 8 hours
CPAP with humidifierabout 22 Wh per hourabout 4.8 nights
CPAP with humidifier and heated tubeabout 34 Wh per hourabout 3.1 nights
Household fridge (EIA average)about 1,690 Wh per dayabout 12 hours
12 V compressor cooler (Dometic CFX3 35)about 280 Wh per dayabout 3 days
1,000 W microwave1,000 Wabout 51 minutes, if output allows

CPAP figures are ResMed's measurements for the AirSense 10 at the settings in its document. The fridge figure uses the EIA's 2020 average for a household's most-used refrigerator. The cooler figure is our calculation from Dometic's published consumption at 90 °F ambient.

Why real runtime is shorter

  • Conversion losses: DC to AC inverters lose some energy, and the loss varies with load.
  • Device ratings are often maximums: a 40 W adapter rarely draws 40 W the whole time, so laptops may run longer than the table suggests.
  • Cycling appliances: a fridge's running watts tell you little; daily energy is what matters.
  • Cold weather and battery age both reduce what you can draw out.

Recharging devices instead of running them

For devices with their own batteries, think in recharges. A 13-inch MacBook Air battery is 53.8 Wh, so 850 Wh is enough for roughly 15 full recharges before charging losses inside the laptop. Phones, with much smaller batteries, recharge many more times.

Check your own devices

Enter your own wattages and hours in the calculator. It reports the energy you need and lists only units whose published specs cover it.

Ready to put numbers on it?

Open the calculator

Sources

  1. Power consumption of Air10 devices. ResMed.
  2. MacBook Air Technical Specifications. Apple.
  3. Consumer Guide to Energy-Efficient Lighting. U.S. Department of Energy.
  4. Table CE5.3b: Detailed household site electricity end-use consumption, averages, 2020 (RECS). U.S. Energy Information Administration.
  5. Dometic CFX3 35 product specifications. Dometic.
  6. CEC Inverter Test Protocol. Sandia National Laboratories, PV Performance Modeling Collaborative.

Related guides

We have not physically tested any product mentioned. Specifications come from manufacturer pages and manuals; calculations are estimates. See our methodology.

← All guides